Cup for Fiat Panda (third series) - image

Files (3)

part-cup.stl

STL

96.6 KB

part-ring.stl

STL

104.5 KB

part-top.stl

STL

75.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
part-cup.stl	Printable file	96.6 KB STL	Slice file	Slice file	Slice file	Ensure the hinge area is smooth for proper interlocking
part-ring.stl	Printable file	104.5 KB STL	Slice file	Slice file	Slice file	Ensure the hinge area is smooth for proper interlocking
part-top.stl	Printable file	75.4 KB STL	Slice file	Slice file	Slice file	Ensure the hinge area is smooth for proper interlocking

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Cup for Fiat Panda (third series)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Another useless and ugly accessory for fiat panda. (third series, since 2012) Parts: - Cup - Ring, to be pasted over cup - Top. - 4 mm metal pin Cup and ring parts have been separated to avoid the supports Beware of the size of the hinge, possibly used fine-grained sandpaper to improve the interlocking. Have fun!