cup holder - Ford Fiesta Mk. IV adaption - image

Files (1)

Getraenkehalter_Gro_V2.stl

STL

386.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Getraenkehalter_Gro_V2.stl	Primary model	386.1 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

cup holder - Ford Fiesta Mk. IV adaption

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The Ford Fiesta Mk. IV is, without any doubts, the best car in the world. However. for some reason Ford decided to not have a cup-holder in it. To fix this error, I took loumgg's „Foldable can holder for car“ (1700811) and adapted the clip to fit our beautiful Fiesta. You'll have to print two files: • loumgg's „support_canette.STL“ • my „Getraenkehalter_Gro_V2.stl“ You do not need print loumegg's „Pince_porte.STL“ Enjoy your upgraded Fiesta!