Files (1)

Cupholder_E36.stl

STL

372.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cupholder_E36.stl	Mount / bracket	372.4 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the back hook is not too delicate for the chosen material and infill density

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Cupholder for BMW E36

2 downloads503 views0 likes

Shared by

Michael Chen

Verified

Description

That is concept, it will be developed. I add photo friends car. And look in car. But friend mounted that with one screw, and stick some hide on top. (after 3 months) Be carefully when delete supports. Back hook is too delicate.