DACIA Spring - Front Left + Right Speaker Adapter - image

Files (4)

DACIA_Spring_-_Front_Left_Speaker_Adapter.3mf

3MF

279.8 KB

DACIA_Spring_-_Front_Left_Speaker_Adapter.stl

STL

4.9 MB

DACIA_Spring_-_Front_Right_Speaker_Adapter.3mf

3MF

279.1 KB

DACIA_Spring_-_Front_Right_Speaker_Adapter.stl

STL

4.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
DACIA_Spring_-_Front_Left_Speaker_Adapter.3mf	Choose left variant	279.8 KB 3MF	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
DACIA_Spring_-_Front_Left_Speaker_Adapter.stl	Choose left variant	4.9 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
DACIA_Spring_-_Front_Right_Speaker_Adapter.3mf	Choose right variant	279.1 KB 3MF	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
DACIA_Spring_-_Front_Right_Speaker_Adapter.stl	Choose right variant	4.9 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

DACIA Spring - Front Left + Right Speaker Adapter

2 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hello everyone, This is an adapter to bring your spring to new speakers! The original speakers have 3 holes while the commercial ones have 4. It will be necessary to remove 2 staples to reuse them towards the holes next door. The parts have been designed for JBL Stage 3 422 speakers but should fit all 10cm (4 inch) speakers. The parts could be improved, I provide the.f3d file (fusion 360). Feel free to keep improving it.