dacia stepway reverse camera holder adapter - image

Files (4)

stepway_cameraHolder.stl

STL

253.4 KB

stepway_cameraHolder26degdown.stl

STL

725.6 KB

stepway_cameraHolder28degdown.stl

STL

622.0 KB

stepway_cameraHolder_V2.stl

STL

254.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
stepway_cameraHolder.stl	Mount / bracket	253.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.
stepway_cameraHolder26degdown.stl	Mount / bracket	725.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.
stepway_cameraHolder28degdown.stl	Mount / bracket	622.0 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.
stepway_cameraHolder_V2.stl	Mount / bracket	254.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

dacia stepway reverse camera holder adapter

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

created an adapter based on the original size and shape wich is situated above licence plate to hold the cheap reverse camera from the android head unit. - using Allwinner quadcore T3_P3 2Gb Ram 16GbRom version (made for renault-dacia duster) - if anyone has some new firmware or apps for this unit i'd like also to get them. i printed in TPU but i think will work with abs or petg. Update: - added a 28deg. tilted version. - added 26 deg. tilted with strenghten position (teeths lowered 1.5mm and internal perimeter increased 1mm). this was the perfect angle for me. enjoy. post a make as thx. provide some feedback.