Files (2)

daihatsu_logo.STL

STL

3.5 MB

daihatsu_logo_backplate.STL

STL

42.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

63g

Based on 25% main infill across listed model files

Material cost

$1.52

Filament only at roughly $24/kg PETG / ASA

Print time

1.8h–3.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
daihatsu_logo.STL	Printable file	3.5 MB STL	48g $1.16	53g $1.26	115g $2.77	Print with a high level of detail to achieve a clean logo appearance
daihatsu_logo_backplate.STL	Printable file	42.1 KB STL	10g $0.23	11g $0.25	23g $0.56	Print with a high level of detail to achieve a clean logo appearance

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Daihatsu Cuore emblem logo

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My car lost its emblem, so I printed a new one. It should be slightly arced, but that won't print very nice. Instead, dip it in some boiling water to soften the plastic, and then bend it into the right shape by hand.