Daihatsu cuore L251 Front cover/lid - image

Files (1)

Daihatsu_deckel_Final.stl

STL

169.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.38

Filament only at roughly $24/kg PETG / ASA

Print time

27m–45m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Daihatsu_deckel_Final.stl	Primary model	169.7 KB STL	14g $0.35	16g $0.38	34g $0.83	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

Daihatsu cuore L251 Front cover/lid

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Front Bumper Drag Lid. Catalog note: Daihatsu cuore L251 Front cover/lid is a 3D-printable car-part listing indexed for classified fitment Daihatsu Cuore. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.