Daihatsu Rocky 1990 Interior Light - image

Files (3)

Daihatsu_Mk_3.stl

STL

259.3 KB

Daihatsu_Mk_4.stl

STL

274.0 KB

Daihatsu_Rocky_1990_interior_light_cover_reboot1_v5.stl

STL

211.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Daihatsu_Mk_3.stl	Printable file	259.3 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing
Daihatsu_Mk_4.stl	Printable file	274.0 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing
Daihatsu_Rocky_1990_interior_light_cover_reboot1_v5.stl	Cover / cap	211.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Daihatsu Rocky 1990 Interior Light

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Old car pars just aren't available. Three versions of the interior light cover for the Diahatsu Rocky, does fit later model Daihatsus as well. Mk 3 is the full cover if you are not using the original mirror, Mk 4 has the mirror cutout section these are similar to the original shape, third version is an exercise in producing a curved version.