Files (1)

Tweeter_Pod_Rev2.stl

STL

1005.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tweeter_Pod_Rev2.stl	Primary model	1005.1 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with the pod standing upright for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Dash Tweeter Pod

1 downloads174 views0 likes

Shared by

Michael Chen

Verified

Description

These tweeter pods were created to use in my '01 Jeep, but could possibly be used in other vehicles as well. If you install them into a new vehicle I'd love to see some pictures. :) This will print easily standing upright with supports. I used default supports and infill in Simplify3D when printing.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files