DIFFERENTIAL RATIO TOOL FOR BMW E30 AND OTHERS - image

Files (3)

HAND.STL

STL

60.8 KB

DIAL2.STL

STL

311.4 KB

DIAL.STL

STL

754.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
HAND.STL	Printable file	60.8 KB STL	9g $0.22	10g $0.24	22g $0.53	Ensure a brim or raft is used for the HAND.STL file if necessary, depending on the slicer settings.
DIAL2.STL	Printable file	311.4 KB STL	15g $0.37	17g $0.40	37g $0.88	Ensure a brim or raft is used for the HAND.STL file if necessary, depending on the slicer settings.
DIAL.STL	Printable file	754.8 KB STL	21g $0.52	23g $0.56	51g $1.23	Ensure a brim or raft is used for the HAND.STL file if necessary, depending on the slicer settings.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

DIFFERENTIAL RATIO TOOL FOR BMW E30 AND OTHERS

0 downloads157 views0 likes

Shared by

Michael Chen

Verified

Description

LIKE SHARE COMMENT it is important If you like to over-complicate a simple task, this is just a thing to try. Take a look at my other designs: Take a look at my youtube channel: I bet you find this design somewhat helpful although it is completely useless so feel free to leave a tip, I accept cryptocurrency also although it is harder to buy beer with it. thanks #E30thebestcarinknownuniversebitch.