Discovery 1 power seat switch cover LH - image

Files (1)

seat_switch_cover.stl

STL

1.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
seat_switch_cover.stl	Cover / cap	1.8 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and supports unlikely.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Discovery 1 power seat switch cover LH

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a cover for the power seat switches on a 1996 Disco 1. In the US model, it's for the driver's side. It should also work for a classic range rover. the part number should be AWR2211. I added some cool ribs that are bigger than the stock ones. I have yet to try and print it, and fit it, but it should be printed upside down, with no supports. updated to add the rim on the inside.