Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Dodge Caravan Rear Wiper -Cap
Shared by
3DPrintedCarPartDescription
The Dodge/Chrysler Dealer wanted $18 for this snap on plastic cap for the rear wiper. This is a plastic cap that covers the (recessed)13mm nut that attaches the rear wiper arm for late model Dodge Caravans and Chrysler Town&Country minivans After exhausting my search on the internet for a 3D printable design, I designed one myself. It's actually a 7/8" (inside)diameter recess that the cap fits into, but I made the cap.91", which is a little larger, but I wanted a really snug, press-in fit (which shouldn't come off unless you want it to). Filament: PLA/PETG Resolution: 0.15mm No rafts, no supports * Print upside down for best results.
Compatible Cars
Originally published on thingiverse.com by Mike Morneau (Electrosonic) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Dodge Caravan Grille Emblem
5th Gen Dodge Caravan Dash Speaker Mount 50mm Hole
Dodge Caravan / Routan Van Rear Entertainment System Tablet bracket
Garmin GPS Mount for Dodge Caravan
Dodge Caravan Magnetic Phone Mount
BMW X5 E70 Center Console Blind Plate
BMW
