Dodge Challenger >2015 "ProClip" - image

Files (3)

30mm.stl

STL

316.1 KB

49mm.stl

STL

341.6 KB

add-on.stl

STL

58.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
30mm.stl	Printable file	316.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality
49mm.stl	Printable file	341.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality
add-on.stl	Printable file	58.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dodge Challenger >2015 "ProClip"

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dodge Challenger >2015 ProClip. This is the same setup as a proclip. I used it to mount my pure DAB radio. Can get hot in the car, so print in ABS or PET. No drilling or glueing. original size is 49mm work in progress: phone mount.