inlay_l.stl

STL

6.3 KB

inlay_r.stl

STL

17.0 KB

links_refl.stl

STL

88.1 KB

rechts_refl.stl

STL

101.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 40%	100% solid	Recommendation
inlay_l.stl	Accessory piece	6.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
inlay_r.stl	Accessory piece	17.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
links_refl.stl	Printable file	88.1 KB STL	Slice file	Slice file	Slice file	Ensure the print orientation is optimized for minimal supports in your slicer.
rechts_refl.stl	Printable file	101.8 KB STL	Slice file	Slice file	Slice file	Ensure the print orientation is optimized for minimal supports in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dodge Challenger > 2015 rear custom reflector

0 downloads49 views0 likes

Shared by

Verified

Description

I blacked out the rear reflectors. Once a year the car has to go for inspection. During that inspection i need to have 2 red rear reflectors, a fog light and side markers. The fog light and reflectors are only in place during inspection and therefore removeble. These reflectors, printed in TPU can be pushed over the blacked out reflectors. No glue, no screws, just push on. The reflective tape is glued on the inlay. Acrylic cover is cut out with my laser cutter. SVG file is attached adhesive reflector: https://nl.aliexpress.com/item/4001010100947.html?spm=a2g0o.productlist.0.0.16a15901qIJdLI&algo_pvid=c3a05887-f1ac-422a-9e01-a1f098bf9e1f&algo_exp_id=c3a05887-f1ac-422a-9e01-a1f098bf9e1f-0&pdp_ext_f=%7B%22sku_id%22%3A%2210000013436929440%22%7D&pdp_pi=-1%3B1.82%3B-1%3B-1%40salePrice%3BEUR%3Bsearch-mainSearch