reparatie_deel.stl

STL

150.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
reparatie_deel.stl	Primary model	150.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dodge Challenger 2015 > side marker hook repair

0 downloads31 views0 likes

Shared by

Verified

Description

There was a post on Facebook about a broken off side marker clip. Tryed to make a repair part that can be glued onto the marker adding the broken off hook. I do not have a broken off maker, could not test it. If it needs adjustments, let me know. I would print it in PETG or ABS. Image below, cut the hook at the red line, glue on the part at the blue box. (to be sure, first tape it on before glueing it) post on Facebook https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/90963908_2773116166140750_3897184832546930688_n.jpg?_nc_cat=108&_nc_sid=ca434c&_nc_ohc=Hw3kHlblkKQAX8kePQh&_nc_ht=scontent-amt2-1.xx&oh=c42b61097100d26c9dff6b75bdd15c14&oe=5EA67325

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by richard te pas (hendrik6073) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

License: CC BY