Charger_v1.stl

STL

3.8 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Charger_v1.stl	Primary model	3.8 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dodge Charger (MiniZ body)

0 downloads147 views0 likes

Shared by

Verified

Description

Dodge Charger for MiniZ (General Lee) It is not my design, I found it on the web, I am just sharing it.

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

License: CC BY