Files (1)

2010_Dodge_Ram_3500_Diesel_Overflow_Cap.stl

STL

275.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	Nylon / PETG 20%	Nylon / PETG 40%	100% solid	Recommendation
2010_Dodge_Ram_3500_Diesel_Overflow_Cap.stl	Cover / cap	275.0 KB STL	Slice file	Slice file	Slice file	Use Nylon / PETG; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Dodge Coolant Overflow Cap

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A co-worker lost the cap to the coolant reservoir on his 2010 Dodge Ram 3500 6.7L Diesel truck. He could not find the CORRECT part anywhere- all of the caps sold online were the same part number- and all too small for his overflow tank's opening. The washer fluid tank used the same exact lid, so he brought that to me to copy. I managed to get a good fit on the 2nd try. I suggest printing in Nylon. I used Taulman Nylon 645. It's flexible enough to fold in half as it needs to, heat resistant, and tough. June 2019 update: 12 months on, my co-worker says the hinge of this cap is still intact, the cap still fits snugly after several openings & closings, and the entire piece has withstood the Florida heat & humidity thus far.