Files (1)

Door_Lock_Rod_Clip.stl

STL

134.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Door_Lock_Rod_Clip.stl	Clip	134.7 KB STL	Slice file	Slice file	Slice file	Ensure proper fit and orientation to the door handle rod

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Door Lock Rod Clip

0 downloads69 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

3D printer to the rescue once again. Two nights ago as I was getting in to my car (2000 Toyota Camry) in the freezing cold, I lifted the handle and nothing happened. Got in through the passenger side and started home, once home I took a quick look, the door handle rod had dislodged from handle, fortunately the handle looked intact. Forward to today, I finally get the door apart and see that the lock rod clip(the yellow thing) is broken and so the rod won't stay in place. Although you can get an assortment of the parts for about 5-8 dollars (Dorman Door Lock Rod Clips 75474), no one has them in stock, so that would mean 3-5 more days of going through the passenger side to open the driver door from inside. After about 45 minutes of measuring and designing and then 3 hours of printing, the problem is solved for now. I'll probably have to have someone else print some in ABS for the summer, but for now the flexible filament seems to be doing the job.