Files (1)

drift_button.stl

STL

131.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
drift_button.stl	Primary model	131.8 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit by checking the dimensions against the original handbrake button.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Drift Button

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Drift button that allows you to pull the handbrake without locking the ratchet. Now you can perform those U turns that turns on teenager girls all over the world (as seen on top gear) without the fear to leave it locked its designed for a Toyota Corolla AE86, with a barrel OD 13.7 and ID of 4.5, with 24 length To mount it just unscrew the original handbrake button, remove the spring, and screw the drift button in. to use, just pull the handbrake and the rear wheels will lock, and as soon as you release the handbrake, the reear wheels will spin again. If you want to park the car, pull the button out as you pull the handbrake up, and the ratchet will lock as a regular handbrake. keep in mind to leave a gear engaged so that if, by any chance, the handbrake goes loose, you wont crash your car.