Files (5)

Copy_of_face_and_body.stl

STL

776.8 KB

dash__PLUGS.stl

STL

178.0 KB

final_gauge_cut_outs_Gear_indicator-_52mm_podRPM_LEDSvolt_meter.stl

STL

654.2 KB

Gear_light_back_cover.stl

STL

18.2 KB

rpm_leds_back_cover.stl

STL

18.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Copy_of_face_and_body.stl	Printable file	776.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
dash__PLUGS.stl	Printable file	178.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
final_gauge_cut_outs_Gear_indicator-_52mm_podRPM_LEDSvolt_meter.stl	Printable file	654.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Gear_light_back_cover.stl	Cover / cap	18.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
rpm_leds_back_cover.stl	Cover / cap	18.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

E36 vent delete W.I.P RHD

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Right hand drive left centre vent. This is a work in progress for my E36 racing simulator dash, I have started by 3d scanning dash vent in meshroom to get the the location of the mounts, then photo copied the face and added the two in tinker cad, it's rough and needs improvements but a great building block. Work in Progress! it is right hand drive dash but should be able to be mirrored for left hand drive dashes. 52mm gauge pod for boost gauge ect, round hole for volt meter, pugs also added. Dash with gauges are fitted with AMSTUDIOS https://www.youtube.com/channel/UCQS1ZB3BVSrBo3tCs7PyfxQ RPM Indicator https://youtu.be/AbLSNcKhkuE RGB REV Lights https://youtu.be/u5kZjg_sJdgGHT