Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

E39 Raspberry Pi CD-Changer Replacement

0 downloads35 views0 likes

Shared by

Verified

Description

Case for a Raspberry Pi 4 and a usb Soundcard as a replacement of the BMW CD-Changer. Connected via the AVR-Ibus Raspberry Shield and IBusCommunicator. Print with a Heat Resistant Material, like ASA or ABS! You need: 8x M3x16 Screws 8x M3 Hexnuts 4x M5x8 Screws 4x M5x8 Hexnuts Glue for the outer Parts The Case will fit into the CD-Changer Holder (Part No. 65 12 8 361 453) http://de.bmwfans.info/parts-catalog/E39-Touring/Europe/530i-M54/browse/audio_navigation_electronic_systems/cd_changer_mounting_parts/ The outside case is a remix of this Box: https://www.thingiverse.com/thing:468917 The Raspberry Pi is mounted using the underside of this Case https://www.amazon.de/gp/product/B00NB1WPEE