Files (2)

echoauto.step

STEP

34.5 KB

shapr3d_export_2020-02-15_18h29m.stl

STL

57.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
echoauto.step	Printable file	34.5 KB STEP	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion if necessary
shapr3d_export_2020-02-15_18h29m.stl	Printable file	57.1 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Echo Auto mount for BMW i3

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The vent mount for the Echo Auto completely blocks airflow from one of the dash vents and disrupts the thermal sensor which makes the HVAC work poorly. I designed a mount that sits on top of the iDrive display. You will need to use some single or double sided foam tape to keep the mount from sliding, I used 3M VHB tape. There's also a hole in the center of the mount to place a small 1cm neodymium magnet to help hold the device in place, though it is optional.