energy drink can holder for tesla model 3 - image

Files (1)

canholder_2.stl

STL

4.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
canholder_2.stl	Mount / bracket	4.0 MB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

energy drink can holder for tesla model 3

0 downloads22 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This energy drink can holder for tesla model 3 fits both 250ml (~53mm diameter) and 330ml ~58mm diameter) energy drink cans safely, even when you press the pedal to the metal. However, large amounts of liquid may spill out and ruin the console between the front seats, the ceiling and the backseats of your car if the can is open and more then ~1/3 full. I refuse any liability for the actual use of this experimental design, any use for whatever purpose is fully at your own risk. If you want to adjust the design for your needs, recommended freecad version is 0.16, opening with 0.17 and newer may cause problems (didn't test it though).