Ergonomic coin-holder for Tesla Model 3 - image

Files (2)

Tesla_M3_-_armrest_box_FRONT_side_-_coin_holder.stl

STL

673.0 KB

Tesla_M3_-_armrest_box_REAR_side_-_coin_holder.stl

STL

661.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Tesla_M3_-_armrest_box_FRONT_side_-_coin_holder.stl	Mount / bracket	673.0 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
Tesla_M3_-_armrest_box_REAR_side_-_coin_holder.stl	Mount / bracket	661.7 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Ergonomic coin-holder for Tesla Model 3

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an ergonomic coin holder - coins are sitting at 30 degree angle, which makes them easier to pick out. Designed to be put into Tesla Model 3 armrest top-compartment. The structure is angled 6 degrees so it's flush with the box wall. Note that 2 versions are available - wider for the front of the box and narrower for the back wall.