Files (1)

FG_CupHolder_Divider.stl

STL

984.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
FG_CupHolder_Divider.stl	Mount / bracket	984.7 KB STL	Slice file	Slice file	Slice file	Ensure the insert fits snugly within the existing centre console

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

FG Falcon Cupholder Insert

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is something I spun up a few years ago and never got around to publish. A friend of mine asked for a better cup holder insert for their FG Falcon. This goes in the existing centre console insert to help hold cans better and stop them from tipping over during hard cornering. Don't forget to print in ABS or ASA as PLA won't survive inside a hot car. Not sure about PETG.