Files (2)

850_trim_clip_3.stl

STL

184.8 KB

850_trim_clip_pin.stl

STL

46.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
850_trim_clip_3.stl	Clip	184.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
850_trim_clip_pin.stl	Clip	46.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Fiat chrome trim clips

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The rear chrome trim off my 1968 Fiat 850 SC was falling, so I removed it and from the remains of the old clips modelled some new ones. Had to tinker a bit with the dimensions because the original ones are made of a rather soft plastic and are much easier to slide inside the profile. Original part number is 4163458, which can still be found at an affordable price, but why bother if you have a 3D printer?