Files (1)

FiatIsoClip.stl

STL

981.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
FiatIsoClip.stl	Clip	981.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

Fiat iso Clip

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Die original Clips verwittern und gehen kaputt. Die Clips sind dafür da um die an der Motorhaube befestigte Dämmung an ihrem Platz zu halten. Ich habe diese mit pLA und Stützstrukturen gedruckt. The original clips weather and break. The clips are there to hold the insulation attached to the bonnet in place. I printed these using pLA and support structures.