Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Fiat Panda 2 Crank Knob

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Here is my design for replacement part of the crank Knob for "Fiat Panda 2". You have to print it by the side (like the model preview) for a strong pieces that doesn't break at the insertion in the crank. Print it with supports! Voici mon design pour remplacer le haut de la manivelle de la Fiat Panda 2. Vous devez imprimer la pièce par le coté (comme sur le visuel) pour une pièce solide qui ne casse pas quand vous l'emboitez. A imprimer avec des supports!