Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| roidmi_punto.stl | Primary model | 711.8 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry print bed for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Fiat Punto 2 - Roidmi 3S Car charger insulation cap
Shared by
3DPrintedCarPartDescription
English: In my car (Fiat Punto 2) the cigarette lighter and the Roidmi 3S is incompatible. Roidmi's metal end caused an electric shock when connected. The fuse is burnt out. That is why I made a cap to the metal to insulate it. Thus, it does not cause an electric lock at the connection. Hungary: Fiat Punto 2 autómban a szivargyújtó és a Roidmi 3S nem kompatibilis. A Roidmi fém vége elektromos zárlatot okozott csatlakoztatáskor. A biztosíték kiégett. Ezért hogy a fém részre készítettem egy kupakot hogy szigeteljen. Így csatlakoztatáskor nem okoz elektromos zárlatot.
Compatible Cars
Originally published on thingiverse.com by lac ko (lac826) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
