Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| HighlanderKnob.stl | Primary model | 524.2 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Fix for broken Toyota Highlander Knob
Shared by
3DPrintedCarPartDescription
The climate control knob on my Toyota Highlander Hybrid snapped off recently. Taking a closer look, it had a very flimsy attachment point and the break shouldn't have been surprising. Another friend of ours had the same problem. Toyota wanted a few hundred dollars to take apart the console and replace the broken part (with the same design flaw). I thought I could do better! This part slips nicely between the knob and the attachment point, making everything work perfectly again.
Compatible Cars
Originally published on thingiverse.com by Jamie Kinney (jamiekin) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
