Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 30%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Focus MK4 phone holder fixture

0 downloads29 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Hello! This is a "toy" for those who hate "air vent clamps" for your phones. Unfortunately, is only for Focus MK4 car. I know there is AA+CarPlay, you wouldn't believe how many people do not like it. The story is simple. Print it (ABS for better durability). "Bridge" and "mainblock" printed upside down (the best from my experience). Support needed!!!. Infill about 30%. Layer 0.2mm, at least that's my choice. The mainblock element might be covered on the bottom and other surfaces with adhesive suede (about 0.5mm thik) to protect from scratches and better fix the block. "Mainblock" to "bridge" is fixed with 4mm screws. "Fixture" to "mainblock" with 2.9mm/3mm, where three of them are 18mm and one is only 10mm long. If you think this work deserves for some appreciation, please leave some donation: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=P78GY9X7Q94ZW&source=url Regards, Piotr.