Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ford_escape_cup_holder_v9.stl | Cover / cap | 2.3 MB STL | 40g $0.97 | 44g $1.05 | 96g $2.30 | Use PETG; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Escape 2008-2012 Cup holder Extender (4" Dia.)
Description
Title is self-explanatory This sits inside the existing cupholder and extends it so you can put mugs, yeti water bottles, mason jars, shaker cups etc into it. Printed with PETG as PLA will deform if left in a hot car. Supports from build surface only. Can just cut the bottom piece of by taking 0.811" off of the Z-axis, it will fit just fine without it.
Originally published on thingiverse.com by Zach Annen (Annen61) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
