Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Part2.STL | Primary model | 515.5 KB STL | Slice file | Slice file | Slice file | Print with the part flat on the build plate as recommended by the designer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Fiesta handbrake black hole plug
Shared by
3DPrintedCarPartDescription
Couple of guys here posted their designs, but after a while they took it down and wanted some money for it. I needed this for my Fiesta so i designed it, measure it and now its doing its job very well. My fiesta is 2015, but i can imagine it will work on many more models. If you print it and it works on your model, comment what year model do you have. Print flat, no support. Use double tape or super glue to fasten it in the hole. I used super glue, it works well. Do this while handbrake is in upper position and make sure black hole doesnt swallow it (mine did, i needed to print it 2 times:D ). Depending on your printer, you will need to maybe enlarge it or shirink it for a couple of percents to have snug fit. Mine was good at 1:1... If you want to thank me, share my model in relevant groups:).
Compatible Cars
Originally published on thingiverse.com by Nikola Petrov (Prospect3dlab) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
