Ford Fiesta MK6 ST150/XR4 Jacking Point cover (Front) - image

Files (3)

ford-jacking-cover-left.stl

STL

3.0 MB

ford-jacking-cover-right.stl

STL

3.0 MB

ford_jacking_cover.step

STEP

410.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ford-jacking-cover-left.stl	Choose left variant	3.0 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
ford-jacking-cover-right.stl	Choose right variant	3.0 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
ford_jacking_cover.step	Cover / cap	410.2 KB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford Fiesta MK6 ST150/XR4 Jacking Point cover (Front)

0 downloads17 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

3 hosted model files

STL + STEP

Material

PETG or ASA for durability in outdoor conditions

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between weight and strength

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166). It is not an exact replica but a version optimized for easier printing and more robust mounting. The cover has to be post-processed further: * support material has to be removed * (optional: check that it actually fits before continuing with the more labor intensive work) * sides and outer wall has to be sanded down to have a smooth surface * surfaces have to be cleaned carefully to remove any oil or dust * use primer to prepare the surface * paint it with the same color as the side skirt * use clear lacquer to finish the cover.