Files (1)

Shifter_Knob.stl

STL

1.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Shifter_Knob.stl	Primary model	1.4 MB STL	Slice file	Slice file	Slice file	Print with the knob upside down to avoid supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford Fiesta Shift Knob 2011

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Ford Fiesta Shift Knob Model Fit = Ford Fiesta SE 2011 Thread Size = 12mm x 1.75mm Material = PLA Finish = Primed, Sanded, Painted Designed using Fusion 360; Original File Included, making it easy to customize it or change the thread size. Designed to emulate the factory shifter by allowing proper slot clip retention of the shifter boot. Able to print without supports with the knob upside down. Finish by priming and wet sanding, and finishing with paint, wet sanding between coats with 400 to 800 wet sandpaper. A filling primer may be ideal.