Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Ford Fiesta Sync 3 bracket

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

If someone wants to add a sync 3 module to a Ford Fiesta Mk7/7.5 in Europe you can get most parts for a reasonable price locally or from the US. Dashboard and supports are needed from the US but it is very hard to come by the metal parts holding the Sync 3 module and screen in place onto the plastic supports from Ford. I recreated them for somebody else who wanted to do the same mod I did as I had the original part to measure. The part is made into two parts as it is way easier to print. If it is too rough you might need some longer screws but in my test case the originals fitted. It is a bit thicker than the original metal part but there is enough space. The two part version can lay mostly flat with some support. Your results may vary. May require some longer screws, depending on print quality v1. Hole are in the wrong place, this one is in use (with correct holes drilled) v2. Holes are in the correct place. Easier to print as it requires less support structures. I have not tested it as I do not need it anymore.