Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus MK3 (2012) Can / Cup holder for 330cl / 500ML / 16oz
Shared by
3DPrintedCarPartDescription
So i have a Ford Focus MK3 (2012) and with monster cans being top-heavy an opened can could (and has) fallen over into a seat during a corner. For this purpose I have remixed inconnel's to fit a regular 330ML Can / 500ML Can. According to the internet, the cans are supposed to be 67mm in Diameter but i found that to be too tight. So the inner diameter of the holder is 68mm. I also gave it sloped sides so when you are driving you don't have to be accurate when trying to put the can in the holder. Due to the can bottom shape and the printed shape it will 'align' automatically and slide right in. I would love it if you could Reply / Post a make or leave a like!
Compatible Cars
Originally published on thingiverse.com by David Beekhuizen (GenerationNuke) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
