Ford Focus MK3 Facelift (2014-2018) read bumper tow hook cover - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Rear Bumper

Ford Focus MK3 Facelift (2014-2018) read bumper tow hook cover

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Someone stole my rear bumper tow hook cover, so I designed a replacement, printed it and plugged it. Has been there for more than a year now, and nobody can tell it is the original one. ### Print Settings --------------------------------------- Printer: Anet A8 Supports: Yes, to buildplate Resolution: 0.2 Infill: 20