Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| focus-qi.stl | Primary model | 30.6 KB STL | Slice file | Slice file | Slice file | Print with the base facing down for optimal adhesion and minimal warping. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus MK4 qi charger spacer for iPhone 12 Pro Max
Shared by
3DPrintedCarPartDescription
Simple thing to fill empty space on Ford Focus MK4 (2018+) built in qi wireless phone charger, when used with iPhone 12 Pro Max in protective case. There's a some incompatibility between iPhone 12 (with built in magnets for MagSafe charger) and Ford charger which lead to frequent charging errors, because phone moves then and forth, especially when device is in protective case. This printable thing keeps phone in place. I've added source file (Fusion 360) for customization. Should work also in Ford Fiesta MK8 (2017+) which uses the same charger and probably the same rubber mat.
Compatible Cars
Originally published on thingiverse.com by Mles Mlesinski (mlask) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
