Based on 25% main infill across listed model files
Filament only at roughly $24/kg ASA / PETG
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ASA / PETG 20% | ASA / PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus ST Big Mouth Ram Air Intake Snorkel
Shared by
3DPrintedCarPartDescription
My husband wanted a Velossa Tech Big Mouth Ram Air Intake but we couldn't justify spending $170 on something already 3D printed when we had our own printer. So I designed him one for his car. It was a PITA and I did this over 3 years ago, so the model is not my best work... But it worked and has survived on his car for over 3 years and through a front-end collision. It's still kickin'. This will probably fit the 2013-2018 but I cant guarantee anything. Ours is a 2016. I printed ours in ASA in 3 parts and glued them together. The flare was one print, and then I split the main portion into a top and lower part in the print slicer since I couldn't fit it as-is on my print bed. There's no ideal way to print the top part with the mount, It requires supports regardless of if you do it with the mounting bracket down or with the other side down. I did mounting bracket down. Mounting part spliced from here so I didnt have to completely measure that. Thank god.
Compatible Cars
Originally published on thingiverse.com by TinaBelcher (TinaBelcher) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
