Ford Maverick Pocket Mount for phones/tablets - image

Files (3)

17mm_ball_mount.stl

STL

124.0 KB

22mm_ball_nount.stl

STL

118.5 KB

Maverick_Pocket_mount_MkI_complete.stl

STL

73.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
17mm_ball_mount.stl	Mount / bracket	124.0 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.
22mm_ball_nount.stl	Printable file	118.5 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.
Maverick_Pocket_mount_MkI_complete.stl	Mount / bracket	73.5 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Ford Maverick Pocket Mount for phones/tablets

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Ford Maverick Dashboard Pocket Mount for '22-'23 year (and possibly newer) vehicles. The design is best printed with ColorFabb nGen or PETG filiament at factory-recomended temperature and settings. Design DOES NOT come with device mount. Included are two ball-style mounting arms (17mm and 22mm diameter balls) Suitable device mounts can be found on internet shopping sites like Amazon.com. Latch arm is attached using superglue with baking soda as an activator for strong adhesion. The ball mount arm can be permanently superglued into place after sanding to obtain a tight fit.