Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| GPS_Body.stl | Printable file | 1.3 MB STL | Slice file | Slice file | Slice file | Ensure proper ventilation when printing with PETG or ASA |
| GPS_Housing.3mf | Printable file | 712.7 KB 3MF | Slice file | Slice file | Slice file | Ensure proper ventilation when printing with PETG or ASA |
| Support_Body.stl | Printable file | 56.5 KB STL | Slice file | Slice file | Slice file | Ensure proper ventilation when printing with PETG or ASA |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Mondeo MK4 GPS-receiver housing
Shared by
3DPrintedCarPartDescription
This is a cover for a GPS receiver for a Ford Mondeo MK4. My GPS-receiver-aerial was broken, and a spare one is not available anymore (Thanks Ford....). The replacement GPS-receiver was bought through Ebay (https://www.ebay.nl/itm/Ford-NX-GPS-Antenne-FAKRA-Stekker-met-Magneetvoet-en-5m-kabel/163596431396). With this cover, the replacement antenna can be attached to the rain-sensor housing behind the rear-view mirror. Here you'll find the STL-files of the receiver as well as the housing. Also the Fusion 360 design is included. Don't print this in PLA, but at least print it in PETG or ABS because of the possible high temperatures in the car during a hot summer. Good luck with printing and assembling.
Compatible Cars
Originally published on thingiverse.com by M. van Hees (MiechHThing17) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
