Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| MME_Charge_Port_Niels_v5.stl | Primary model | 48.2 KB STL | Slice file | Slice file | Slice file | Print with a 0.3mm layer height for a smooth finish |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Mustang Mach-E, Anti Dent clip
Shared by
3DPrintedCarPartDescription
The Ford mustang mach-e charger cover flap has a crytical flaw. While the car is charging tha flap is open and someone could collide with it cousing the flap to make a dent in the car. This clip limits the opening size and helps reducing the chance of a dent in your car. Printing: I prited this clip with a 0.3mm layer height. No support is needed. Placing the clip: Open the charger flap fully. insert the hook side of the clip (smallest side of the print) in the small opening marked with A in the provided images. then gently close the flap, but not fully close it. this will leave enough room to wiggle the clip upwards and to slide the thick part of the clip in the clamp of the flap.
Compatible Cars
Originally published on thingiverse.com by Niels de Klerk (Nklerk) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
