Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Ford S-Max cup holder reduction

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A cup holder reduction for a Ford S-Max (first version, WA6). It holds cans with 58mm diameter. Can possibly be used for other Fords from that generation, too. I didn't put any holes in there to save filament, because it should be easy to clean, if you spill something. Made it a little bit smaller so it fits in there without any issues. So you propably have to place a small piece of paper in there in order to fix it in the holder. If you want, you can try scaling it a bit. Would like to hear how it worked out. Have fun and send pictures;).