garagedooropener4.stl

STL

77.5 KB

garagedooropener4.stp

STP

83.8 KB

garagedooropenercap4.stl

STL

38.3 KB

garagedooropenercap4.stp

STP

27.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
garagedooropener4.stl	Printable file	77.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality
garagedooropener4.stp	Printable file	83.8 KB STP	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality
garagedooropenercap4.stl	Cover / cap	38.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
garagedooropenercap4.stp	Cover / cap	27.8 KB STP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

FR-S / BRZ / 86 Storage Tray Garage Door Opener

0 downloads33 views0 likes

Shared by

Verified

Description

This is a little holder for a garage door opener that goes in the BRZ. If anyone needs just the storage tray box, I can provide a blank one, just let me know. These are the buttons I used: https://www.amazon.com/gp/product/B0119FH5Z2/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1