front bumper supports for BMW E39 - image

Files (2)

E39_left_front_bumper_support.stl

STL

298.1 KB

E39_right_front_bumper_support.stl

STL

298.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
E39_left_front_bumper_support.stl	Choose left variant	298.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
E39_right_front_bumper_support.stl	Choose right variant	298.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

front bumper supports for BMW E39

0 downloads56 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Front bumper bracket instead of factory broken. Catalog note: front bumper supports for BMW E39 is a 3D-printable car-part listing indexed for classified fitment BMW E39. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.