Gear Knob for Fiat-Abarth 124 Spider - Mazda MX-5 ND - image

Files (5)

coperchio.stl

STL

258.4 KB

disco_centrale.stl

STL

82.3 KB

marce.stl

STL

242.7 KB

pomello_inferiore.stl

STL

298.9 KB

pomello_superiore.stl

STL

287.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
coperchio.stl	Printable file	258.4 KB STL	Slice file	Slice file	Slice file	Ensure proper threading of M3 holes in the lower half after printing
disco_centrale.stl	Printable file	82.3 KB STL	Slice file	Slice file	Slice file	Ensure proper threading of M3 holes in the lower half after printing
marce.stl	Printable file	242.7 KB STL	Slice file	Slice file	Slice file	Ensure proper threading of M3 holes in the lower half after printing
pomello_inferiore.stl	Printable file	298.9 KB STL	Slice file	Slice file	Slice file	Ensure proper threading of M3 holes in the lower half after printing
pomello_superiore.stl	Printable file	287.1 KB STL	Slice file	Slice file	Slice file	Ensure proper threading of M3 holes in the lower half after printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Gear Knob for Fiat-Abarth 124 Spider - Mazda MX-5 ND

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This gear knob is mountable on all cars that have the gearstick knob coupling with an M10X1.25 mm thread and the 6-speed configuration with reverse gear forward on the left. Printed with 0.06 mm layer height and polished with 1000 grit paper, water and oil in the finish. Inside are: No. 4 brass cylinders 12 mm diameter, 20 mm height No. 2 steel nuts M10X1.25 mm 2 M3X35 mm screws are used to fasten the 2 halves and the central rim The holes of the lower half must be M3 threaded after printing. The cover with the gear indication can be easily printed using the reverse printing method even with single-colour machines.

Compatible Cars

Abarth 124 Spider

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (Immaginaecrea) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.