Gen 1 Mini Cooper R53 Cup Holder flexible parts preview

Files (1)

R53_mini_Cup_Holder_Bottom.stl

STL

8.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU (95A shore hardness as recommended by the designer) 20%	TPU (95A shore hardness as recommended by the designer) 40%	100% solid	Recommendation
R53_mini_Cup_Holder_Bottom.stl	Mount / bracket	8.3 MB STL	Slice file	Slice file	Slice file	Verify support generation and orientation in your slicer for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Gen 1 Mini Cooper R53 Cup Holder flexible parts

0 downloads21 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

TPU (95A shore hardness as recommended by the designer)

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports likely

Infill

Flexible infill settings, potentially with a lower infill density to maintain flexibility

Difficulty

Not rated — inspect geometry

Vehicle heat

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Time and my child had destroyed half of my tabs to hold a cup in. So I made a new one, much stronger and flexes nice with 95A TPU. This is for the right side, but you can mirror the top to make it for the left (for RHD vehicles). Parts are orientated how they should be printed. You will need supports. I use a heavily modified Prusa Bear 2.5s, Overture TPU, 230/60. Top updated. Added Mini logo and shrunk overall height by 2mms for better fitment.