Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Accord_08-13_Shifter.stl | Primary model | 4.0 MB STL | Slice file | Slice file | Slice file | Ensure the print is properly aligned for optimal performance |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Gen 8 Honda Accord 2008-2013 Shift Knob
Shared by
3DPrintedCarPartDescription
2009 Accord Coupe V6 Shift Knob (probably works on other Gen 8 models) I have a 2009 Accord Coupe V6 manual, and I didn't care for the stock shift knob at all, so I decided I'd design my own. It is presently installed on the car, and it holds the shift boot quite well (just like the stock one did). However this one is more comfortable, provides better communication from the transmission, and looks less tacky IMO. Please enjoy! Notes: - Since this is going in a car, which can get pretty hot, be sure to print in something that can handle the heat. - There are no threads in this print. So when you are installing it, the shift shaft will tap the treads for you. But this means you need to be careful with your first couple of rotations to make sure the treading is going straight.
Compatible Cars
Originally published on thingiverse.com by Rob Brown (TheMakerRob) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
