front-cam-grooves.stl

STL

236.3 KB

front-cam-visor.stl

STL

230.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
front-cam-grooves.stl	Printable file	236.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
front-cam-visor.stl	Printable file	230.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Gen6 Camaro Front Camera Visor

0 downloads102 views0 likes

Shared by

Verified

Description

I got tired of wondering if I'm gonna scrape the air splitter on the front bumper when parking, so I picked up a camera set at an Amazon returns store for $7 & integrated the monitor into the visor. A mercury tilt switch turns it on when the visor is flipped down & off when flipped up. I hot glued the frame into the visor, so I made a 2nd version with grooves for extra glue grip, although the smooth one works fine for me. monitor https://www.amazon.com/Itomoro-Mirror-Crystal-Baby-Easily-Observe/dp/B07VFWLRLS tilt switch https://www.ebay.com/itm/10Pcs-lot-Glass-5mm-Mercury-Switch-Angle-Tilt-Switch-Switches/293690051702